Chicken coop manure removal belt
Qingzhou Baimu Machinery Co., Ltd.
Poultry House Manure Belt System Introduction
The manure belt system enables fully automatic, enclosed manure removal—reducing labor, lowering ammonia levels, and improving barn environment. It’s a standard setup in modern layer and breeder farms.
1. Material
The manure belt is made of high-strength PVC or PU composite material—smooth, corrosion-resistant, and tear-resistant. Reinforced with a polyester fabric layer for durability, it performs well in humid, ammonia-rich poultry environments.
2. Available Sizes
- Common belt widths: 400 mm, 500 mm, 600 mm, 700 mm (customized to cage width);
- Thickness: 1.8–3.0 mm;
- Roll length: 50 m, 100 m, or custom-made.
3. Key Specifications
- Tensile strength: ≥200 N/mm;
- Operating temperature: -20°C to +60°C;
- Running speed: approx. 1–3 meters per minute;
- Motor power: 0.37 kW–0.75 kW (gear motor).
4. Typical Dimensions (for single-row cages)
- Belt width: 50–100 mm wider than cage bottom to prevent spillage;
- Installation height: directly under cage floor, 0.8–1.2 m above ground;
- Support roller spacing: every 1.5–2 meters to keep the belt flat.
5. Installation
Thread the belt through the house, looping around the drive drum and tail drum to form a closed loop. Use a tensioning device to adjust tightness and prevent slippage. The motor drives the drum to automatically convey manure to an external collection pit. Test run after power-on to check for misalignment or jamming.